You know what really grinds my gears...

skullman80
Posts: 19587
Joined: Wed Mar 25, 2015 5:02 pm
Location: Monroeville, PA

You know what really grinds my gears...

Postby skullman80 » Mon May 13, 2024 9:03 am

I already mentioned to my wife that we should plan to be away during that week lol. The thing is there is a softball tournament that weekend in Ohio again (world series of softball) and I think it's four days. I'm pretty sure they plan on going on vacation right after that tournament...so in all reality it could be like 10 days or so of watching the dog. Just not happening.

If our yard was fenced in it would be easier and almost doable. Our own dog is a runner and has to be on a lead all the time. Their older dog is not a runner but she is deaf and half blind at this point so can't let her out without her being on a leash, and the youngest dog is two years old and has crazy energy. They have an electric pet fence at home that keeps the peace, but we don't have that here.

I/we don't mind helping. It's just the lack of respect on asking ahead of time, things always last minute, then things extending on way longer than they are supposed to. For us to have two dogs here for 10 days and try to work and sleep is crazy, to try and have three dogs here is just not a thing that is possible. They will need to figure something out, but we shall see what happens as we get closer. I told my wife we need to have this discussion now and not wait for them to drop this on us last minute.

NTP66
Posts: 61240
Joined: Sun Oct 04, 2015 2:00 pm
Location: FUCΚ! Even in the future nothing works.

You know what really grinds my gears...

Postby NTP66 » Mon May 13, 2024 9:29 am

Even if you don't plan on going away, just tell them that you have a scheduled trip and can't do it.

meow
Posts: 30798
Joined: Thu Mar 26, 2015 8:53 am
Location: I have four degrees and am a moron. Don’t let that fool you

You know what really grinds my gears...

Postby meow » Mon May 13, 2024 12:29 pm

skully hates his niece confirmed

nocera
Posts: 42454
Joined: Fri Mar 27, 2015 10:47 am
Location: He/Him

You know what really grinds my gears...

Postby nocera » Mon May 13, 2024 12:38 pm

I wouldn’t lie. Just tell them that it’s become too much with your schedule and your own animals. Maybe offer to help them find a suitable place to board them when they travel.

tifosi77
Posts: 51843
Joined: Wed Mar 25, 2015 1:07 pm
Location: Batuu

You know what really grinds my gears...

Postby tifosi77 » Mon May 13, 2024 3:08 pm

Tell them to sod off and provide them a map (with arrows) showing them where they can shove their discourtesy.

meow
Posts: 30798
Joined: Thu Mar 26, 2015 8:53 am
Location: I have four degrees and am a moron. Don’t let that fool you

You know what really grinds my gears...

Postby meow » Mon May 13, 2024 4:44 pm

Email: from John.Smith@mycompany.org

Subject line: Hello - from John Smith

Body: Hi meow. I’d like to introduce myself as John Smith


dude go play in traffic. is this how we teach kids these days?

mikey
Posts: 42958
Joined: Thu Mar 26, 2015 10:58 pm
Location: More of a before-rehab friend...
Contact:

You know what really grinds my gears...

Postby mikey » Mon May 13, 2024 4:48 pm

Is that the whole email...? Or was there a point somewhere...?

meow
Posts: 30798
Joined: Thu Mar 26, 2015 8:53 am
Location: I have four degrees and am a moron. Don’t let that fool you

You know what really grinds my gears...

Postby meow » Mon May 13, 2024 4:58 pm

no it went on to say what team he’s on and how is director told him to reach out to me. I felt it odd to introduce yourself basically three times

shafnutz05
Posts: 50743
Joined: Tue Mar 24, 2015 7:27 pm
Location: A moron or a fascist...but not both.

You know what really grinds my gears...

Postby shafnutz05 » Mon May 13, 2024 5:16 pm

Email: from John.Smith@mycompany.org

Subject line: Hello - from John Smith

Body: Hi meow. I’d like to introduce myself as John Smith


dude go play in traffic. is this how we teach kids these days?
"As John Smith"? Does he have an alternate alias? What a boob

LeopardLetang
Posts: 2623
Joined: Sat Mar 28, 2015 1:27 pm

You know what really grinds my gears...

Postby LeopardLetang » Mon May 13, 2024 5:18 pm

Image

RonnieFranchise
Posts: 12639
Joined: Sat Mar 28, 2015 5:45 pm
Location: Phil Kessel's name is on the Stanley Cup. Thrice.

You know what really grinds my gears...

Postby RonnieFranchise » Thu May 16, 2024 9:44 am

On the road this week, went down to the Hampton breakfast bar on Tuesday, no forks. Minor inconvenience to eat my eggs and sausage with a spoon, No worries.

Yesterday, picked breakfast up on the way to the plant.

Thursday, went before my flight to get a waffle. Still no forks.

SEND SOMEBODY TO EFFING WALMART AND GET SOME DAMN FORKS.

Missing stupid little details really annoys me.

Shyster
Posts: 13337
Joined: Wed Mar 25, 2015 6:08 pm
Location: Nullius in verba

You know what really grinds my gears...

Postby Shyster » Fri May 17, 2024 10:03 pm

This is a minor gear-grinder, but I just read a couple posts on X where people were complaining about their flights being delayed and they spent several hours "sitting on the tarmac." Tarmac isn't a place, and it isn't used as a place in aviation circles. Tarmac is a form of layered surface made of asphalt and crushed concrete and stone. It probably came to be used in aviation circles because it was commonly used to pave early airports, although it hasn't been used to pave airports for decades because it wouldn't hold up to the weight of modern aircraft. But there's no part of an airport that's called the "tarmac."

The part of the airport right around the terminal where the places park for loading, unloading, and fueling is officially called the apron by the ICAO and FAA, although in the US and Canada the term ramp is also often used. The long strips where aircraft take off are obviously runways, and the “roads” airplanes take to get to and from the runways are taxiways. That's it. There are no other official names for the surfaces at an airport. One's flight might have been stuck waiting on the apron, or stuck waiting on a taxiway, or maybe even told to go wait on a closed runway, but it wasn't stuck on any tarmac.

tifosi77
Posts: 51843
Joined: Wed Mar 25, 2015 1:07 pm
Location: Batuu

You know what really grinds my gears...

Postby tifosi77 » Fri May 17, 2024 10:50 pm

Runways. Got it, important tip. Thanks, Egon.

faftorial
Posts: 15064
Joined: Tue Nov 05, 2019 10:35 pm
Location: Lengeschder

You know what really grinds my gears...

Postby faftorial » Fri May 17, 2024 11:38 pm

People "suffering" are using the wrong terminology.

How dare they.

Shyster
Posts: 13337
Joined: Wed Mar 25, 2015 6:08 pm
Location: Nullius in verba

You know what really grinds my gears...

Postby Shyster » Fri May 17, 2024 11:43 pm

Runways. Got it, important tip. Thanks, Egon.
I didn't want some smartass saying "You forgot runways." I see that was a no-win scenario.

nocera
Posts: 42454
Joined: Fri Mar 27, 2015 10:47 am
Location: He/Him

You know what really grinds my gears...

Postby nocera » Fri May 17, 2024 11:46 pm

Very specific semantic argument is the perfect gear grind.

MrKennethTKangaroo
Posts: 12653
Joined: Sat Mar 28, 2015 3:50 pm

You know what really grinds my gears...

Postby MrKennethTKangaroo » Sat May 18, 2024 12:11 am

Very specific semantic argument is the perfect gear grind.
Honestly I’m not sure why anyone is given shyster flak for this one. This is a gr8 use of the gear grinding thread. Much better use than UGH the ups guy put my package too close to the lawn and the automatic sprinkler got it

mikey
Posts: 42958
Joined: Thu Mar 26, 2015 10:58 pm
Location: More of a before-rehab friend...
Contact:

You know what really grinds my gears...

Postby mikey » Sat May 18, 2024 10:09 am

Yeah, n! is just being a bully...this is exactly what this thread is for...

MalkinIsMyHomeboy
Posts: 29726
Joined: Wed Mar 25, 2015 1:45 pm
Location: “MIMH is almost always correct” -ulf

You know what really grinds my gears...

Postby MalkinIsMyHomeboy » Sat May 18, 2024 10:34 am

people who nitpick gear grindings grind my gears

Sam's Drunk Dog
Posts: 6782
Joined: Wed Mar 25, 2015 7:10 pm
Location: Less Coronavirus; More Donnie Iris
Contact:

You know what really grinds my gears...

Postby Sam's Drunk Dog » Sun May 19, 2024 3:23 pm

When lane is abbreviated as LA instead of LN on a street sign.

NTP66
Posts: 61240
Joined: Sun Oct 04, 2015 2:00 pm
Location: FUCΚ! Even in the future nothing works.

You know what really grinds my gears...

Postby NTP66 » Sun May 19, 2024 3:24 pm

It's not abbreviated, Bucks County simply ran out of money for the other letters...

Who is online

Users browsing this forum: MrKennethTKangaroo, nocera, skullman80 and 114 guests